Magic Flagpole
Patented Hungarian Innovation
Patented Hungarian Innovation
The PATENTED Magic Flagpole device can be easily installed on any flagpole – no expertise required.
The mounting device is invisible from the outside, only the beautifully waving flag is visible.
The flag moves freely, doesn't twist, doesn't tangle, and waves beautifully to its full extent.
Less wear, less replacement – longer-lasting flag.
Flagpole diameter: 26 mm (25–26 mm standard building-mounted pole).
Minimum flag sleeve inner diameter: 36 mm. Can be larger, not smaller.
Flag sleeve width when flattened: min. 55 mm (±1 mm).
1: From the bottom, slide the flag holder structure onto the pole with the conical expanding claw side UPWARD, so that it is 3 cm below the finial, then secure it with a screw through the hole visible at the bottom to the pole. If done correctly, the conical part should rotate easily!
2: From the bottom, pull the flag onto the pole, threading its sewn sleeve part onto the flag holder.
3: Fully pull the flag material onto the flag holder by gently compressing the conical part and pulling the flag 1–2 cm beyond the small claws!
4: Release the flag holder, which will slightly open and grip the flag material with its small claws. If done correctly, the flag with the structure should rotate easily on the pole! The flag material should not touch the finial but should completely cover the flag holder structure so the claws can grip it.
GERE FLAG is a two-part mounting device that must be placed on the flagpole and inside the flag sleeve. The expanding ends firmly hold the sleeve, allowing the flag to wave freely without twisting, while the mount remains invisible from the outside.
GERE-PERFECT Bt.
5126 Jászfényszaru, Mátyás király út 24.
+36 30 428 0031
Adószám: 22581044-1-16